Total heat exchange technology / comfortable wind /
1
Multiple filtration
ADSQR series full heat exchange fresh air dehumidification system only uses sheet metal body shell, which has better protection for the internal structure of the product; The core structure is high-efficiency total heat exchange core. The material with heat transfer and transmission performance is used in the hot core body. Therefore, the exhaust air can be used to pre cool and dry the fresh air in summer and preheat and humidify the fresh air in winter, which can significantly reduce the fresh air load, thus saving the energy consumption of the cooling and heating system, It is very beneficial to save operation cost and reduce peak power consumption.
Primary salt spray filter:
Filtration efficiency grade G3 ~ M5 can be selected, for ≥ 5.0 μ The filtration efficiency is 40% ~ 60%
Corrosion resistant material is used as filter material, and zhedieshi folding method has large dust capacity
Medium efficiency salt spray filter:
Filtration efficiency grades F5 ~ F8 are available
The filter material is made of corrosion-resistant CA material with large dust capacity
High efficiency salt spray filter:
Filtration efficiency grade F8 ~ f13 is available
H13 filtration efficiency: for ≥ 0.3 μ The filtration efficiency is 99.99%
E10 filtration efficiency: for ≥ 0.5 μ The filtration efficiency of M particles is 95%
F8 filtration efficiency: for ≥ 1.0 μ The filtration efficiency of M particles is 80%
Smart WiFi Internet of things Adcqr series has built-in intelligent WiFi function. Under the condition of smart phone or tablet computer networking, it can switch various modes through WiFi to realize remote real-time detection of equipment operation. At the same time, it is equipped with standard remote RS485 communication protocol port to support standard controller control
Full heat exchange core, energy saving and environmental protection The equipment adopts high-efficiency heat exchange core. Because the material with heat transfer and transmission performance is used in the heat exchange core, the exhaust air can be used to pre cool and dry the fresh air in summer and pre heat and humidify the fresh air in winter, which can significantly reduce the fresh air load, thus saving the energy consumption of the cooling and heating system, It is very beneficial to save operation cost and reduce peak power consumption.